signwire system

SignWire Products
Channel Letter Accessories


Paige sign wire accessories offer the sign builder and sign installer products that are use specific. These products are designed to meet the most current UL and NEC requirements. Each individual product addresses and solves common problems that are typical in the building and installation of LED signage. These products offer the customer not only competitive pricing but also value added labor savings. Whether you are a sign builder, sign installer or combination of both, you cannot find products anywhere in the industry that will enhance the profitability and reliability of your sign project.

RIP STRIP II LOGO
paige Wall Buster
980014 (14") & 980030 (30")
Reduces material and Labor costs.
9/16 inch holes are all that is required.
No sharp metal edges in contact with insulated conductors.
UL Listed and designed specifically for LED channel Letters.
 UL LOGO    patented 

fullspecbutton                 installation
LED Powersupply Box
Specifically designed for LED transformer applications.
Small enough to manage in tight spaces. Front loading allows vertical placement and transformers to be installed later. Side mounted spring power source holding clips allow installation of powers sources without the use of screws. Holes in the bottom allow natural ventilation to rise to the top and condensation to escape from the bottom. Allows one or two transformers to be installed in the box. Wet listed by UL. Can be used for electronic neon transformers. Secondary connections remain free from all moisture and corrosion when used with the Paige Anti-Corrosion Splice Kit.
 UL LOGO    UL E339010    patented

fullspecbutton                 installation

                
LED Powersupply Box
Our deeper LED Power Supply Box accepts most 100 and 120 watt power sources Specifically designed for LED transformer applications. Small enough to manage in tight spaces. Front loading allows vertical placement and transformers to be installed later. Side mounted spring power source holding clips allow installation of powers sources without the use of screws. Holes in the bottom allow natural ventilation to rise to the top and condensation to escape from the bottom. Allows one or two transformers to be installed in the box. Wet listed by UL. Can be used for electronic neon transformers. Secondary connections remain free from all moisture and corrosion when used with the Paige Anti-Corrosion Splice Kit.
 UL LOGO    UL E339010    patented

fullspecbutton                 installation

paige channel Letter Splicew kit
Designed specifically for low voltage splice applications. No stripping of wires. Allows for one power input and 2 output wires. Accommodates wires from 16 AWG to 22 AWG. Eliminates exposed copper exposure to oxygen and moisture. Anti-corrosion jell operates from -40°C to 105°C. Only pliers are needed for installation. UL & c(UL) listed UL LOGO    RoHs Logo  

fullspecbutton                 installation

SIX 18 AWG stranded wires
Accommodate SIX 18 AWG stranded wires (power source +5). Eliminates exposed copper exposure to oxygen and moisture. Locking lid provides strain relief for wires. Anti-corrosion jell operates from -40°C to 105°C. Anti-corrosion jell is water resistant and rain tight. Sunlight resistant. Rated at 600 Volts. No special tools other than wire stripper needed for installation. UL & c(UL) listed
UL LOGO    RoHs Logo  UL LOGO   UL 314R
fullspecbutton     installation